5-point mortise lock with MCM bolts model 701-5 enamelled finish

• MCM lock model 701-5 with 5 points entry 50 in enameled finish with 45mm wide strike plate for the door frame with 70mm cylinder included .
• This 5-point lock must be mortised into the door with its 22mm wide and 9.5mm deep U shape .
• The central lock has 4 round bolts while the supplementary locks have 3 bolts .
• The entrance of the lock is 50mm , that is, the distance from the edge to where the center of the cylinder is is 50mm.
• The bolts extend a maximum of 20mm, which is obtained with 2 turns .
• The center distance of the lock is 85mm, a standard measurement for most security locks.
• The strike plate reinforcement included in the lock offers greater resistance to leverage.
• You can install any other Europrofile cylinder that you need in this lock.

Lock technical sheet